Maybe your costs crept up over the last few months and nobody can say exactly why. Maybe you just inherited an account from a former employee or a previous agency, and you have no idea what’s actually happening inside it. Either way, you need a clear way to find out what’s working, what’s wasting money, and what needs to change.

That’s what a PPC audit does. It’s a structured review of an active pay-per-click account, looking at structure, keywords, ad copy, tracking, and spend, to surface exactly what’s helping and what’s hurting.

This guide specifically covers Google Ads and Microsoft Ads, since that’s where most paid search budgets live. Paid social campaigns deserve their own audit approach, which we’ll cover in a separate guide.

By the end, you’ll have a complete framework you can run yourself, step by step.

Key Takeaways:
  • Action is everything: A PPC audit only matters if it leads to action. Finding problems without fixing them is just an expensive way to confirm something felt off.
  • Start with tracking: If your conversion data is broken or incomplete, every other finding in the audit could be built on bad information.
  • Know when to get help: The framework here will catch the obvious problems yourself: broken tracking, thin negative keywords, a drifted landing page. The subtle ones, like a bid strategy that’s technically working but leaving money on the table, usually need a second set of eyes.

What Is a PPC Audit?

A PPC audit is a structured review of an active pay-per-click account, account structure, keywords, ad copy, tracking, and spend, to find what’s working, what’s wasting budget, and what needs to change.

It’s narrower than a full marketing audit. Our broader marketing audit framework treats the PPC audit as one piece of a larger system, alongside SEO, content, and other paid channels. If you need the full picture across every channel, that’s the better starting point. If you just need the paid search piece, this guide covers it in full.

This guide is scoped to Google Ads and Microsoft Ads, since that’s where the bulk of search-based PPC spend lives. Paid social runs on a similar discipline but follows a different set of platform-specific checks, which we’ll cover in a dedicated paid social audit guide.

One more thing worth saying upfront: an audit is a diagnostic step, not a fix. It tells you what to change. Acting on it is a separate job, and we’ll come back to that at the end. With the definition out of the way, the next question is when you actually need to run one.

When You Need a PPC Audit

png;base64,iVBORw0KGgoAAAANSUhEUgAAAGQAAAABCAQAAACC0sM2AAAADElEQVR42mNkGCYAAAGSAAIVQ4IOAAAAAElFTkSuQmCC

You’ll hear “audit your account every quarter” a lot. It’s not bad advice, but it’s not the most useful trigger either. The calendar doesn’t know if your account actually needs a closer look. These signals do.

5 Signs You Need a PPC Audit:
  • You inherited an account from a previous agency, freelancer, or employee, and you have no real history on what’s been done or why.
  • Costs have crept up and nobody can point to a clear cause.
  • Conversions have gone flat or dropped while spend held steady or increased.
  • You’re about to scale budget significantly, and you want to know the foundation can support it before adding more weight on top.
  • Something major just changed: a new product line, a new market, a platform policy update, and the campaign structure hasn’t caught up yet.

If more than one of these is true at the same time, the audit isn’t optional. It’s overdue.

How to Do a PPC Audit: Step-by-Step

Work through these in order the first time, especially if this is a new account to you. Later steps depend on earlier ones being clean, and skipping ahead tends to waste the time you’re trying to save.

If you’re running Performance Max alongside standard search campaigns, the structure and keyword steps below apply most directly to search. We’ll cover what changes for PMax specifically in Step 7.

Step 1: Verify tracking tags and conversions are working

This goes first because everything else in the audit depends on it. If tracking is broken, every other finding could be built on bad data.

Confirm the Google tag is actually installed, whether through Google Tag Manager or directly in the site code, and firing on the right pages. This sounds basic, but we’ve audited accounts that had been running ad spend for months with no Google tag on the site at all. No tag means no real data, no matter how clean the campaign structure looks on the surface.

For Microsoft Ads specifically, confirm the UET tag is installed and firing correctly. Our Microsoft Ads deep-dive walks through that setup in detail, so we won’t repeat it here.

Once you’ve confirmed the tags themselves are in place, check what they’re actually reporting. Are conversions firing on the right actions? Is anything being counted twice? Do the platform’s reported conversion numbers actually match what shows up in your CRM or analytics? If those three things don’t line up, stop here and fix it before going further.

💡 Agency Insight:

It’s more common than you’d think for an account to run for months with broken or partial tracking. Sometimes this step alone explains everything else you find later in the audit.

Step 2: Review account and campaign structure

png;base64,iVBORw0KGgoAAAANSUhEUgAAAGQAAAABCAQAAACC0sM2AAAADElEQVR42mNkGCYAAAGSAAIVQ4IOAAAAAElFTkSuQmCC

Look at how campaigns and ad groups are actually organized. Is there a clear logic, by product line, service, audience, or geography, or did the structure grow on its own with no real plan behind it? A common pattern: one bloated “General” ad group holding fifty unrelated keywords because it was easier to dump them somewhere than decide where they belonged.

Pay attention to ad group size. Tight ad groups built around a handful of closely related keywords earn better quality scores than broad groups stuffed with dozens of loosely connected terms. If you want the mechanics behind why that’s true, our auction mechanics breakdown covers it in more depth.

Flag anything that’s clearly outdated: paused products, expired promotions, old geographic targets that no longer apply. These don’t just sit there harmlessly. They consume budget and quietly skew your data while you’re trying to evaluate everything else.

Step 3: Audit keywords and match types

Pull the keyword list and check what you find against these three things:

  • Match type distribution. An account leaning almost entirely on broad match with no negative keyword discipline behind it is one of the most common, and most expensive, problems we see.
  • Keyword overlap. When the same or similar keywords show up across multiple ad groups or campaigns, they compete against each other in the auction and send mixed signals about what’s actually working.
  • Search volume. Terms with very low or zero volume aren’t earning their place. They add clutter without adding performance, and they make the account harder to evaluate every time you come back to it.

Step 4: Review negative keywords

png;base64,iVBORw0KGgoAAAANSUhEUgAAAGQAAAABCAQAAACC0sM2AAAADElEQVR42mNkGCYAAAGSAAIVQ4IOAAAAAElFTkSuQmCC

Pull the search terms report and look for patterns like irrelevant queries the account keeps showing up for and paying clicks on. This is one of the fastest ways to find money leaking out of an account that otherwise looks fine on the surface.

💡 Agency Insight:

A thin or outdated negative keyword list is one of the most common sources of wasted spend, and one of the easiest to fix once you’ve actually found it. The harder part is noticing it in the first place, which is exactly why this step exists.

This isn’t a one-time list you set and forget. Check whether there’s evidence of regular review, or whether the same irrelevant traffic keeps showing up audit after audit with nobody addressing it.

Step 5: Evaluate ad copy and ad assets

Check whether ads are running as full responsive search ads, with a real set of headlines and descriptions, or whether they’re thin, single-version ads that haven’t been touched in a while.

Look for relevance. Does the ad actually speak to what the keyword and the searcher are looking for, or is it generic enough to belong to any business in the category? Vague copy doesn’t just convert worse. It costs more per click, since relevance feeds directly into quality score.

Check ad assets and extensions: sitelinks, callouts, structured snippets. Missing assets are an easy, low-effort fix that gets overlooked more often than you’d expect, and they’re some of the cheapest wins available once you spot the gap.

Step 6: Check landing page alignment

png;base64,iVBORw0KGgoAAAANSUhEUgAAAGQAAAABCAQAAACC0sM2AAAADElEQVR42mNkGCYAAAGSAAIVQ4IOAAAAAElFTkSuQmCC

For each major ad group, click through to the actual landing page. Does it match what the ad promised, same offer, same language, a clear next step? A surprising number of audits turn up ads pointing to a page that no longer matches the offer that earned the click.

A few specific things to check on each page:

  • Does the headline echo the ad’s promise, or does it require the visitor to figure out if they’re in the right place?
  • Is there one clear call to action, or several competing for attention?
  • Does the page ask for more information than it needs to at this stage? A long form on a page that should just be capturing interest is a common, quiet conversion killer.

This is also where quality score quietly takes a hit. A mismatched or slow-loading landing page raises costs across the entire ad group, not just on the page itself, since landing page experience is one of the three factors quality score is built on.

While you’re there, check load speed and the mobile experience too. It’s a fast check, and the impact is bigger than the time it takes.

Step 7: Review budget allocation and bid strategy

Look at where budget is actually going versus where it’s actually performing. It’s common to find budget sitting on legacy campaigns out of habit, not because they’re earning their share.

Check the bid strategy in use, manual, Target CPA, Target ROAS, Maximize Conversions, and whether it matches how much conversion data the account actually has. Automated strategies need real volume to work well. Accounts without enough conversions often see worse results forcing automation too early, before the system has anything meaningful to learn from.

Bid strategyMinimum conversion volume neededBest fit
Maximize ClicksNoneNew accounts with little to no conversion history
Maximize ConversionsSome history helps, not requiredAccounts ready to automate but still building data
Target CPA30+ conversions in the last 30 daysStable accounts with a clear cost-per-lead goal
Target ROAS30+ conversions with revenue data attachedEcommerce accounts with reliable revenue tracking

If the account is running Performance Max, treat the audit a little differently. PMax campaigns don’t give you the same keyword-level visibility as standard search campaigns, so the structure and keyword checks from earlier steps won’t fully apply. Instead, focus on asset group organization, search theme quality, and whether the campaign is cannibalizing traffic that your standard search campaigns were already converting well.

Flag any campaign that consistently spends well above or below its allotted budget. That’s rarely a budget problem on its own. It’s usually a signal that something upstream, targeting, bids, or relevance, needs a closer look.

Reviewing the Competitive Landscape

Everything above looked inward, at your own account. A complete audit doesn’t stop there. Knowing what competitors are bidding on, and how their ads and landing pages are positioned, gives real context to everything you just found.

Sometimes a perfectly healthy account still loses ground because the competitive landscape shifted underneath it. A new competitor enters the auction, an existing one expands their budget, or someone starts outbidding you on terms that used to be cheap. None of that shows up by looking inward.

If your CPCs have been climbing and nothing in your own account explains why, a competitive review often answers the question faster than another pass through your own campaigns. We’ve covered exactly how to do this in reviewing competitor Google Ads, so we won’t repeat the full process here.

Should You Audit It Yourself or Hire It Out?

Some of this you can absolutely do yourself. Other parts genuinely benefit from someone who’s seen enough accounts to know what’s normal and what isn’t. Here’s how that split actually breaks down.

What you can catch yourself

These checks require attention and time more than deep platform expertise. The framework above gives you everything you need to run them.

CheckWhat to look for
Conversion trackingTags installed and firing, numbers matching your CRM
Negative keywordsObvious junk traffic in the search terms report
Landing page alignmentHeadline and offer matching the ad
Outdated campaignsPaused products or expired promotions still spending
Ad assetsMissing sitelinks, callouts, or extensions

Here’s a real example: An account we inherited from a previous vendor had duplicate ads for various locations to reduce ad creation time. But they didn’t ensure the copy for each duplicate was updated to the new location! It was a mess, with ads for the wrong locations targeting the wrong areas. To fix it, we had to comb through the entire set of ads to correct headlines and descriptions so each ad targeted the right location with matching copy.

What usually needs a second set of eyes

These judgment calls come from pattern recognition across many accounts, not from a single audit using a checklist.

Judgment callWhy it’s harder to self-assess
Bid strategy fitRequires knowing what’s normal at your conversion volume
Quality score patternsNeeds comparison across dozens of ad groups to spot what’s actually off
Industry benchmarksGeneric best practices don’t account for your specific market
Account structure qualityCan function fine while still being far from optimal

For some accounts, it is easy to set up a traffic or conversions goal and drive a ton of what seem like positive results. What typically requires an expert eye is looking beyond a foundation that appears to be driving results and assessing whether those results are actually high quality for the account. Audience research, strategy refinement, and knowing which platform levers to pull help turn bulk results into revenue attributable to paid efforts.

If you are to take anything away from this, it should be: Running through this framework yourself will catch the obvious problems. It usually won’t catch the subtle ones, the gap between the two tables above. That gap is what a second set of eyes is actually for.

What to Do With Your Audit Findings

A PPC audit isn’t a one-time event. The framework above is something to come back to whenever one of the triggers from earlier shows up again, a new cost spike, a flat conversion rate, a major account change.

The audit itself isn’t where the value is. What changes afterward is. An audit that surfaces five problems but doesn’t lead to five fixes was just an expensive way to confirm something felt off.

Need a Second Set of Eyes on Your Account?

Our Google Ads management work starts with exactly this kind of audit on every new account, not as a sales tactic, but because you can’t build a good plan on a foundation you haven’t actually checked.

If your findings point toward needing an ongoing managed program rather than a one-time fix, reach out and we’ll talk through what that could look like.

FAQs About PPC Audits

There’s no universal schedule that fits every account. A quarterly check-in is a reasonable default for stable accounts, but the real signal is situational. A new account, a sustained cost increase, or a major business change is a stronger trigger than the calendar.

A PPC audit looks specifically at one channel: campaign structure, keyword grouping, match types, negative keyword coverage, and landing page alignment. A marketing audit is broader, reviewing SEO, content, paid media, email, and analytics together to see how every channel works as one system. If you want the channel-specific version, this guide covers it. If you want the full picture, our marketing audit looks at everything at once.

Yes, for the more straightforward checks: conversion tracking, search terms, basic structure. The framework in this guide will catch the obvious issues. Less obvious problems, like a bid strategy that’s technically functional but underperforming, usually take more account experience to spot.

The platforms themselves, Google Ads and Microsoft Ads, provide most of what you need: search terms reports, the Keyword Planner, and built-in performance data. A spreadsheet works fine for organizing what you find. No specialized paid tool is required to run the framework in this guide.

Stopping at the diagnosis. An audit that identifies five problems but doesn’t lead to five fixes is just a longer way of confirming something felt off. The audit only matters if it changes what happens in the account afterward.